Rubber Products With Anti-vibration Characteristics

Rubber and plastic products refer to natural and synthetic rubber as raw materials to produce all kinds of rubber and plastic products activities, but also the use of waste rubber recycling of rubber products.

The basic characteristics of rubber and plastics products:

1. Rubber and plastic products molding, after a large pressure to suppress the elastic body due to the cohesion can not be eliminated, in the mold from the mold, Rubber And Plastic Products often resulting in a very unstable shrinkage (rubber shrinkage, due to different varieties of rubber Difference), must go through a period of time before the gentle stability. Therefore, when a rubber and plastic products at the beginning of design, regardless of formula or mold, must be carefully calculated with, if not, it is easy to produce product size instability, resulting in low quality products.

2. Rubber is a thermosetting thermosetting elastomer, Rubber And Plastic Products plastic is hot and cold. Rubber due to the different types of sulfide, its molding curing temperature range, there is a considerable gap, even due to climate change, indoor temperature and humidity affected. Therefore, the production conditions of rubber products, need to be adjusted at any time, if not, Rubber And Plastic Products it may produce product quality differences.

Rubber products advantages

1. Low thermal conductivity: the average temperature of 0 ℃, the thermal conductivity of the material is 0.034w / mk, and its surface heat release coefficient is high, so the same external conditions, the use of this product thickness than other insulation materials thin half The above can achieve the same insulation effect, Rubber And Plastic Products thus saving the floor above the ceiling space, saving investment.

2. Flame-retardant properties: the material contains a large number of fire-retardant smoke-reducing raw materials, burning smoke generated when the concentration is very low, and the case of fire does not melt, will not drop the fire of fireball, the material has self-extinguishing characteristics. According to GB8624-1997 "building materials combustion performance classification method", rubber and plastics products for the B1 level of flame retardant materials to ensure safe and reliable.

3. Easy to install, beautiful appearance: Because of the softness of the product, easy to install. Pipeline installation: can be set together after the installation, Rubber And Plastic Products but also the longitudinal cutting of the pipe and then glue together. On the valve, three links, elbow and other complex parts, the plate can be cut, according to different types of adhesive on the package to ensure the tightness of the entire system to ensure the insulation of the entire system. Because of the appearance of the material is smooth rubber, and its own excellent performance, without additional steam layer, protective layer, reducing the construction of the trouble, Rubber And Plastic Products but also to ensure a beautiful appearance, smooth.

4. Anti-vibration characteristics: rubber and plastic insulation material has a high flexibility, which can minimize the chilled water and hot water pipe in the course of the use of vibration and resonance.

5. Other advantages: rubber and plastic insulation materials are very safe to use, Rubber And Plastic Products neither to stimulate the skin, it will not harm health. They can prevent mold growth, to avoid pests or rats bite, and acid and alkali resistance, superior performance. These properties make rubber and plastics an ideal insulating material for the protection of the pipes, preventing them from being corroded by atmospheric or industrial environments